新闻中心

1.中型济南货架的安装方式： 竖起一个柱片，在底部菱形孔处插入两根横梁注意对齐；竖起另一个柱片，按步骤1方式插入横梁注意对齐；按照以上插入方式，把其余的横梁按照所需层高依次插入注意对齐；把层板依次放入P型梁上，完成。 Installation of medium-sized Ji'nan shelf: put a column, into two beams at the bottom of the diamond hole note alignment; another piece of string up, step by step into 1 beams that alignment; in accordance with the above insert mode, the rest of the beam according to the required height in order to insert note alignment; put the plate turn into P beam, complete.

2.重型济南货架的安装方法：首先把横拉（横撑），斜拉（斜撑）用螺丝安装在立柱上；组装好的两个立柱片竖立在地上；两片立柱片距离调整为横梁的长度后装上横梁即可；安装副架的时候也是先把立柱片装好，然后把装好的立柱片离主架的一边立柱片距离调整为横梁的长度后装上横梁即可。The installation method of heavy Ji'nan shelf: first the horizontal pull (brace), cable-stayed (brace) installed in the column by screws; the assembly of the two column piece good erected on the ground; two uprights to adjust the distance between the beam length with beam can be installed; when the subframe is first the column piece installed, then the column piece installed from the main frame side column piece to adjust the distance between the beam length after loading on the beam can be. 

3.悬臂式济南货架的安装方法：专用型材做底座，将两片C型钢背对背的用连接钢板焊接在一起。连接钢板的宽度即是立柱的宽度；两片C型钢焊接完成后在连接立柱位置开连接螺栓眼，便于与立柱连接；边焊接连接底板，便于膨胀螺栓与地面连接。The installation method of 3 cantilevered shelves of Ji'nan: special steel base, two pieces of C type steel back-to-back connecting plates are welded together. The width of the connecting steel plate is the width of the column; after the two pieces of C steel are welded, the connecting bolt hole is arranged at the position of the connecting column, which is convenient for connecting with the upright post, and the bottom plate is welded and connected with the bottom plate, which is convenient for the expansion bolt to be connected with the ground.